Forums118
Topics9,199
Posts195,600
Members1,323
|
Most Online5,850 Feb 29th, 2020
|
|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Here is a link to show exactly where the Space Station is over earth right now: Click Here
|
|
6 registered members (Karen Y, dedication, ProdigalOne, Kevin H, Daryl, 1 invisible),
2,944
guests, and 18
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Table Format Testing
#106777
12/30/08 04:14 PM
12/30/08 04:14 PM
|
|
I am not certain how table formatting works, or whether it can even be done, however, I have set up this testing topic to find out.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106778
12/30/08 04:18 PM
12/30/08 04:18 PM
|
|
From my initial researching, I don't think tables can be done here, however, I am still researching this.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106779
12/30/08 04:29 PM
12/30/08 04:29 PM
|
|
UBB Code doesn't allow for coding and for security reasons HTML is not enabled for every member, however, if you know the HTML code for tables, I could set up a special HTML enabled member group.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106781
12/30/08 04:36 PM
12/30/08 04:36 PM
|
|
I actually set up a special HYML enabled members group, however, this will be extended to some members on an as needed basis.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106782
12/30/08 05:49 PM
12/30/08 05:49 PM
|
Active Member 2019 Died February 12, 2019
2500+ Member
|
Joined: Dec 2008
Posts: 2,536
Canada
|
|
I actually set up a special HYML enabled members group, however, this will be extended to some members on an as needed basis. Hi Daryl, it looks like you should be able to enable HTML somewhere in this software. If I understand, we need to request it? I need to send a table on a HTML format, can you grant my request?
Blessings
|
|
|
Re: Table Format Testing
[Re: Elle]
#106784
12/30/08 06:01 PM
12/30/08 06:01 PM
|
|
Elle,
I am going to set you up so that you can use HTML, therefore, if you are familiar with HTML codes, you should be able to set up a table.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106787
12/30/08 06:19 PM
12/30/08 06:19 PM
|
|
Elle, You should now be able to use HTML both here and in the Life of Christ forum. You may want to do some table testing here first, unless you are already familiar with it.
|
|
|
Re: Table Format Testing
[Re: Daryl]
#106800
12/30/08 09:44 PM
12/30/08 09:44 PM
|
Active Member 2019 Died February 12, 2019
2500+ Member
|
Joined: Dec 2008
Posts: 2,536
Canada
|
|
Hi Daryl, I'm no expert in using forums. I do know a little about HTML and regularly use it to update websites etc... However, I'm unable to make this work. It seems this software compiler is not noticing it is HTML code even thought I have the Markup as Using HTML. I've tried different type of code. I must agree my file was pretty large. I'll try again with a simple HTML file. If you don't here from me again. Then it's because It was not a success. I did follow the instruction below. I wonder if there is a precode like {html}? I tried that too, but did not work.
Here is what the FAQ of this software says: There are 2 ways that this can be configured on a per-forum basis. If HTML is On then you will see HTML is On and you can use normal HTML in your posts. If UBBCode is on you will see UBBCode is On.
Blessings
|
|
|
Re: Table Format Testing
[Re: Elle]
#106851
12/31/08 01:06 PM
12/31/08 01:06 PM
|
SDA Active Member 2024
5500+ Member
|
Joined: Oct 2008
Posts: 6,425
Midland
|
|
For what it's worth, here is some simple HTML table code: <table><tr><td>one</td><td>two</td></tr></table>
It should produce one row of two columns with the words "one" and "two" in the columns.
However, if as Daryl said elsewhere that HTML is turned off due to recommendations, it won't work. There must be more than one way of turning it off.
|
|
|
Re: Table Format Testing
[Re: kland]
#106854
12/31/08 01:52 PM
12/31/08 01:52 PM
|
Active Member 2019 Died February 12, 2019
2500+ Member
|
Joined: Dec 2008
Posts: 2,536
Canada
|
|
Hi Klang, Thanks for the code and helping to solve this. Daryl did give the priviledge to test this by enabling HTML. I tried your code which I got the same result with my tests. The software compiler just spit out the same code without converting it.
Blessings
|
|
|
|
Here is the link to this week's Sabbath School Lesson Study and Discussion Material: Click Here
|
|
|